Construction companies depend on a number of Ground Improvement Technology options to help with their construction projects to go smoothly and safely. Before any construction project begins, contractors need to be aware and prevent anything that can goe wrong with the ground. This makes sure the ground is stable and will not pose a threat to the contractors or workers as well as the public. It is crucial that the ground is solid and stable and is free of any sort of contamination being spread because of the construction work.
Wet grouting consists of mixing gravel or sand with water for easy application to the ground to encourage stability and prevent instability. Grouting can be a tiresome and frustrating experience for the novice. The key to grouting is timing. If you wait too long, the grout will dry and be nearly impossible to remove. Sanded grout is much easier to work with than other kinds of grout.
This is one of the most popular forms of gout that a construction contractor will use while working on a construction project. This is a technique used to ensure the ground is stable for construction building. These techniques are used for commercial and residential construction purposes. Jet grouting involves using a high-pressure system that pumps fluid into the soil or ground. The fluid breaks up and spreads in the soil, causing a consistent mixture throughout the soil. This is done to prevent or remove any inconsistencies that may have occurred over a period of time.
There are three different kinds of fluids. The names are monofluid, 3-fluid, and 2-fluid techniques. All three techniques use water and other fluid mixed in to help break up the old soil and firm up the ground. Most construction contractors will determine which technique is best for the project they are working on. There are additional procedures performed, even though jet grouting is the general purpose of grouting.
Remedial Soil Stabilization
The next kind of grouting is Remedial Soil Stabilization is done by injecting fluid under the crust of the soil without breaking up the ground. This is often used on areas where the foundation is already pretty secure.
Low Mobility Compaction
Low Mobility Compaction produces firmness. It is another form of gout that removes granular soil and stabilizes the ground beneath to avoid the possibility of sinkholes. While using a pipe, the procedure is done by using a pipe that is injected into the ground to treat the soil.
Chemical Soil Stabilization
One last form of gout is to apply chemical soil stabilization as a placement of large quantities of clay into the soil to stabilize it. This method creates stability in the ground without using substances that would cause problems with the construction.
For more information concerning Geo-Solutions, click the link to learn about types of Grout.